Home Italian Version


Apri/ChiudiRiscaldatori a Cartuccia
Alta Densita di Potenza
Alta Densità con TC
Media Densità
Bassa densità
Altissima Densità
Hi-Temp. Super Sealing
Bassa Tensione
PTC Autolimitanti
Riscaldatori per Bulloni
Riscaldatori a Cartuccia per Fluidi
Super Stagna ad Alta Temp.
Accessori & Costruzioni speciali
Scarica il Catalogo
Apri/ChiudiElementi Microtubulari
Caratteristiche
Misure Standard
Modulo d'Ordine
MAXI-Rollmax
MINI-Rollmax
MICRO-Rollmax
Macchina Spiralatrice
Versioni Speciali
Super Stagna ad Alta Temp.
Scarica il Catalogo
Apri/ChiudiRiscaldatori per Ugelli
Caratteristiche (Piromax)
A Fascia in Ottone
A Fascia in Acciao Inox
A Fascia Sottillissimi
Scarica il Catalogo
Apri/ChiudiRiscaldatori a Fascia
Riscaldatori con isolamento in Mica
Riscaldatori in Ceramica
Riscaldatori Rettangolari
Cast Alu/Brass Heaters
Protection Housings
Insulating Pads
Contact Accessories
Connection Boxes
Clamping Devices
Catalogue download
Apri/ChiudiRiscaldatori Piatti
Mica Flat Heaters
Cast Alu/Brass Heaters
Grooved Heating Plates
Apri/ChiudiRiscaldatori a Cartuccia Piatti
Features
Connection Options
Heating Options
Bending in Shapes
Application and Shapes
Catalogue download
Apri/ChiudiRiscaldatori Tubolari
Plain Tubular Heaters
Square Cross-Section
Finned Tubular Heaters
Duct Air Heaters
Threaded Immersion Heaters
Flanged Immension Heaters
Scarica il Catalogo
Apri/ChiudiRiscaldatori a Cartuccia per Radiatori
Riscaldatori a Potenza Costante
Riscaldatori PTC Autolimitanti
Connettori e adattamenti
Unità di Controllo
Scarica il Catalogo
Apri/ChiudiIrradiatori Infrarossi
Caratteristiche
Applicazioni & Scelte
Dati Tecnici
Modelli
Gruppi con parabola
Colori Termosensibili
Scarica il Catalogo
Apri/ChiudiCompleti-Riscaldatori Ceramici
Caratteristiche
Technical Data
Apri/ChiudiTermocoppie & Resistenze
TC isolati con MgO
Conventional TC
Termoresistenze
Accessori
Catalogue download
Apri/ChiudiCavi Scaldanti
Autoregolanti
Potenza Costante
Minerale Isolato
Protezione contro Gelo
Apri/ChiudiRiscaldatori Flessibili
Etched Foils - Informazioni Generali
Features - Etched Foils
Apri/ChiudiRiscaldatori per Fusti
Riscaldatori per Fusti Integrali
Riscaldatori flessibili per Fusti
Apri/ChiudiRiscaldatori MoSi2
Caratteristiche
Apri/ChiudiRiscaldatori ad Aria
Selezione
Usi
Applicazioni
Models
Apri/ChiudiTermoregolatori
Models
Apri/ChiudiUnita di Controllo temperature
Features

Se il menu sopra non risulta visibile, aggiornare a
aggiorna a Firefox 2.0
 
RISCALDATORI A CARTUCCIA - RISCALDATORI A CARTUCCIA PER FLUIDI

 
Large-Diameter Cartridge Heaters for Fluids

Use
For heating liquids, air and gases.

Dimensions, diameter
Nominal value, diameter 38 mm 48 mm 58 mm
Outer diameter, head 52 mm 54 mm 63 mm
Height, head 20 mm 10 mm 8 mm
Nominal value, diameter 38 mm 48 mm 58 mm
Outer diameter, head 52 mm 54 mm 63 mm
Height, head 20 mm 10 mm 8 mm

Dimensions (length)
Minimum mounting length approximately 90 mm, increasing in units of about 50 mm. Maximum dimensions practically unlimited, depending on the technical requirements. About 10% longitudinal expansion to be considered while measuring length of the heating element on account of heating (special models possible in mm-wise length increments).

Power
Any convenient power, depending on use type, installation and environment conditions. Maximum power (heated elements are 50 mm long each) corresponding to the heating of the following media:
- Water, stationary; 300 Watt 380 Watt 450 Watt
- Caustic solution, fluid 250 Watt 320 Watt 380 Watt
- Oil, fluid 200 Watts 250 Watt 300 Watt
- Oil, viscous 120 Watt 150 Watt 180 Watt
- Metals, heating through contact 180 Watts 230 Watt 280 Watt
- Air, stationary 150 Watt 190 Watt 230 Watt

Unheated lengths
Increasing in 50 mm units from the connecting head.

Power (Watt)
Any convenient wattage up to the maximum load values of the corresponding use type. Power limit, one-phase per connection 30 A. In AC current, 30 A per phase. In case of one-phase connection, option of two separate power phases.

Connection
Screw connection M6

Tension (Volt)
Any convenient voltage under the precondition that it should be technically feasible.

Temperature
Operational temperature depends on material of the bores or insertion tubes, maximum 650 °C

Installation
Insertion-based construction. For heating of fixed objects in the bores through contact - standard diameter of heating element. For heating of liquids, air and gases in tubes of clear width - standard diameter of heating element. Wall thickness approximately 1÷3 mm (corresponding mechanical requirements or pressure conditions). Tube casing made of non-combustible material. Heat transfer tubes are welded to the container or register to be heated.

Model
Winded heating coils, drawn into the grooves of the longitudinally arranged ceramic components. The grouped parts are screwed to each other with the help of an axially placed rod Made of non-combustible material. In the vertical installation, slumping of the heating coils is prevented by the ceramic mass between the parts. Testing according to VDE 0720.

Ordering information
- Quantity
- Nominal diameter / mounting length
- Tension (Volt) / Power (Watt)
- Unheated length
For use in the vertical installation position, please add the note: "vertical installation".
 

Azienda | Organigramma | Prodotti | Cataloghi | Qualità | Rivenditori | Mappa del Sito| Whistleblowing

© 1999 ROTFIL s.r.l. Via Praglia 15 10044 Pianezza TO (Italy) > Come trovarci < Partita Iva 01846410015
T. +39-011-9683-111 - F. +39-011-9683-225 - e-mail:info@rotfil.com

Leggi la tua e-mail

web site by Anxera