Home


Apri/ChiudiCartridge Heaters
High Watt Density
High Watt Density with TC
Medium Watt Density
Low Watt Density
Extra-High Watt Density
Hi-Temp. Super Sealing
Low Voltage
PTC Self-Limiting
Bolt Heaters
Cartridge Heaters for Fluids
Hi-Temp. Super Sealing
Options & Accessories
Catalogue download
Apri/ChiudiMicrotubular Coil Heaters
Features
Standard Sizes
Ordering Forms
MAXI-Rollmax
MINI-Rollmax
MICRO-Rollmax
Coiling Machine
Special Versions
Hi-Temp. Super Sealing
Catalogue download
Apri/ChiudiNozzle Heaters
Features (Piromax)
Brass Nozzle Heaters
Stainless Steel Nozzle Heaters
Extra-Thin Nozzle Heaters
Catalogue download
Apri/ChiudiBand Heaters
Mica Band Heaters
Ceramic Band Heaters
Rectangular Band Heaters
Cast Alu/Brass Heaters
Protection Housings
Insulating Pads
Contact Accessories
Connection Boxes
Clamping Devices
Catalogue download
Apri/ChiudiFlat Heaters
Mica Flat Heaters
Cast Alu/Brass Heaters
Grooved Heating Plates
Apri/ChiudiFlat Cartridge Heaters
Features
Connection Options
Heating Options
Bending in Shapes
Application and Shapes
Catalogue download
Apri/ChiudiTubular Heaters
Plain Tubular Heaters
Square Cross-Section
Finned Tubular Heaters
Duct Air Heaters
Threaded Immersion Heaters
Flanged Immension Heaters
Catalogue download
Apri/ChiudiCartridge Heaters for Radiators
Constant-power Heaters
PTC Self-Limiting Heaters
Connection Fitting
Control Units
Catalogue download
Apri/ChiudiInfrared Radiant Heaters
Features
Applications & Choice
Technical Data
Models
Reflectors
Thermo-sensitive Colours
Catalogue download
Apri/ChiudiFully-Ceramic Heaters
Features
Technical Data
Apri/ChiudiThermocouples & Resistances
MgO-insulated TC
Conventional TC
Thermoresistances
Fittings
Catalogue download
Apri/ChiudiHeating Cable
Self Regulating
Constant Power
Mineral Insulated
Freeze Protection
Apri/ChiudiFlexible Heating Tapes
Etched Foils - General informations
Features - Etched Foils
Apri/ChiudiDrum Heaters for Barrels
Integral Drum Heaters
Flexible Drum Heaters
Apri/ChiudiMoSi2 Heaters
Features
Apri/ChiudiAir Heaters
Selection
Use
Application
Models
Apri/ChiudiThermoregulators
Models
Apri/ChiudiTemperature Control Units
Features

If you don't see the above menu, update to
update to Firefox 2.0
 
THERMOCOUPLES & RESISTANCES - MGO-INSULATED TC - TECHNICAL DATA

 
Types of MgO thermocouples
Type Sensor Element Insulation Body material External diameter mm
E Chromel/Constantan MgO AISI 304 - 900 °C 0.25 - 0.5 - 1 - 1.5 - 2
3 - 4.5 - 6 - 8 -12.7
J Iron/Constantan AISI 310 - 1150 °C
K Chromel/Alumel AISI 316 - 926 °C
R Pt 13% Rh/Platinum AISI 321 - 900 °C
T Copper/Constantan INCONEL 600 - 1150 °C
Standard junctions of sensitive elements
UNGROUNDED JUNCTION The sensing junction between the leads is totally insulated both electrically and mechanically from the body. Main application is in very hard-working conditions (with vibrations, thermal shocks, chemically aggressive environment, etc.) under which it provides a long working life.
GROUNDED JUNCTION The sensing junction between the leads is directly welded on the body. This solution allows a good performance under pressure, high humidity and mechanical stress. Also, it is particulary recommended to get a fast response.
EXPOSED JUNCTION Fast responce is the feature of this junction. It is reccommended for measurement of gas or solid surfaces in non-corrosive environmnts.
Thermocouples working ranges
The temperature range depends on the thermocouple type, see below diagram:


 Working ranges
 R = Pt 13% Rh/Platinum
 T = Copper/Constantan
 J = Iron/Constantan
 E = Chromel/Constantan
 K = Chromel/Alumel

Electrical signal of different thermocouples.
TC001
Type J,K,T.
Type of sensor: grounded-ungrounded-exposed.
- Body material: AISI 321 for J and T, INCONEL 600 for K.
- Body O.D. (mm): 0,25-0,5-1-1,5-2-3-4,5-6-8.
- Lenght L: upon request.
- Junction number: one or two.
- Very flexible sensor
 
TC002
Type J,K,T.
Type of sensor: grounded-ungrounded-exposed.
- Body material: AISI 321 for J and T, INCONEL 600 for K.
- Body O.D. (mm): 0,25-0,5-1-1,5-2-3-4,5-6-8.
- Lenght L: mm 300 standard, other on request.
- Hot junction number: one or two.
 
TC003
Standard plug probe.
Type J,K,T.
Type of sensor: grounded-ungrounded-exposed.
- Body material: AISI 321 for J and T, INCONEL 600 for K.
- Body O.D. (mm): 0,25-0,5-1-1,5-2-3-4,5-6-8.
- Lenght L: mm 300 standard, other on request.
- Hot junction number: one or two.
 
TC004
Bayonet type thermocouples adjustable pressure contact.
Type J,K,T.
Type of sensing point: grounded-ungrounded-exposed.
- Body material: AISI 321 for J and T, INCONEL 600 for K.
- Body O.D. (mm): 1-1,5-2-3.
 
TC006
Type J,K,T.
Type of sensor: grounded-ungrounded-exposed.
- Body material: AISI 321 for J and T, INCONEL 600 for K.
- Body O.D. (mm): 0,25-0,5-1-1,5-2-3-4,5-6-8-12,7.
- Lenght L: mm 300 standard, other on request.
- Thread fitting:1/2”.
- Hot junction number: one or two.
 

Company | Organization | Products | Catalogues | Quality | Dealers | Site Map| Whistleblowing

© 1999 ROTFIL s.r.l. Via Praglia 15 10044 Pianezza TO (Italy) > How to reach us < Partita Iva 01846410015
T. +39-011-9683-111 - F. +39-011-9683-225 - e-mail:info@rotfil.com

Leggi la tua e-mail

web site by Anxera